Low Voltage (24v DC Electric Roller Blind Kits)
Online Catalogue | Electric Roller Blind Kits | Low Voltage (24v DC Electric Roller Blind Kits)
|
 |
Introduction
Intelli-Blinds Electric Roller Kit is a perfect solution to DIY your own electric roller blinds. All our kits are easily adjusted to your window width and include everything to get you going.
Our basic kit includes the roller tube, standard motor and fixing brackets.
Then, to make it work you need to decide how it is to be controlled.
If you simply want a remote controlled electric roller blind then you should choose Control Option 3 or 4 below.
Or if your an expert and are going to connect the roller blind to a home or building automation system then you need only purchase the blind only or blind & PSU options after verifying your system can operate 24v DC motors with a reverse capability. |
|
|
Custom Made Size
The measurement shown below in the ordering section allows you to choose a width between 500 and 1900mm. This is the final complete blind width in millimeters including the brackets.
To work out what size you'll need for your window simply measure the reveal and take off 5mm and select the nearest size. So for example if your window reveal is 1342mm wide you should select the 1335 size. Typically a finished blind is around 5-15mm less than the reveal. Note to take into account any obstruction in the window eg skirting boards, dado rails etc.
You should also check measure the window at the top and bottom as window reveals are rarely square, if your window does taper then you should use the smaller of the sizes. |
|
|
Control Option 1 & 2: Standard Motor For Home Automation
If you have home or building automation installed then you probably do not need to purchase any controls from us.
Our basic kits can be connected to any automation system that can operate 24v DC Motors forwards and reverse. This is achieved by reversing the polarity to the motor. Please see the following document for more information.
Our roller blind kits are known to be compatible with:
Rako, Lutron Homeworks, Crestron, Rako, LightwaveRF, Control-4, Somfy, KNX and many others.
Available with or without the PT-24 Power Supply. |
|
|
Control Option 3: IBRS Radio Motor
The IBRS Radio Motor option includes:
Intelli-Blinds Low Voltage Roller Blind Kit With IBRS Radio Motor (Motor with built-in receiver)
Intelli-Blinds IBRS 5 Channel Handset (Transmitter)
Intelli-Blinds PT-24 Plug In Power Supply
Benefits:
> Low Cost
> Very flexible radio system. Program one channel onto many blinds or many blinds onto one channel.
> Radio handset, no need to point to the blinds.
> 5 Channel handset, allows for future expansion.
> Fully integrated motor, features built-in radio receiver means no external modules to hide and electronic limit setting from the remote control. No need to access the blind when setting top and bottom limit. |  |
|
|
Control Option 4: Somfy RTS Module Set
The Somfy RTS Module option includes:
Intelli-Blinds Low Voltage Roller Blind Kit With Standard Motor
Somfy 25DC Module (Receiver)
Somfy Telis 1 Pure Handset (Transmitter)
Intelli-Blinds PT-24 Plug In Power Supply
Benefits:
> Receiver and handset compatible with other Somfy RTS products sold worldwide.
> Wide range of additional options eg: Somfy Chronis Timer, Somfy Sunis Sun & Temperature sensor, Centralis Wall Swicth etc.
> Very flexible radio system. Program one channel onto many blinds or many blinds onto one channel.
> Radio handset, no need to point to the blinds.
> Stylish Somfy Telis Pure handset |  |
|
|
Online Catalogue | Electric Roller Blind Kits | Low Voltage (24v DC Electric Roller Blind Kits)
